Mechanical characteristics of high-performance concretes with substitution of fine aggregate by waste material from CETRIS boards production.
1
VŠB — Technical University of Ostrava, Faculty of Civil Engineering, Ludvíka Podéště 1875/17, 708 00 Ostrava-Poruba, Czech Republic
Submission date: 2024-12-12
Acceptance date: 2026-06-07
Publication date: 2026-06-16
Corresponding author
Kateřina Matýsková
VŠB — Technical University of Ostrava, Faculty of Civil Engineering, Ostrava, Czech Republic
VŠB — Technical University of Ostrava, Faculty of Civil Engineering, Ostrava, Czech Republic
Cement Wapno Beton 30(5) 389-398 (2025)
KEYWORDS
TOPICS
ABSTRACT
This paper discusses the possibility of replacing fine aggregates in high performance concrete [HPC] with waste material from CETRIS boards production [WCM]. CETRIS boards are made from a combination of fine wood chips and cement mortar, and a large amount of waste material is generated during their production - cutting and grinding of the boards. In this research, fine waste material from CETRIS boards was used as a potential replacement for fine aggregate in concrete. The high-performance concretes were designed with a maximum size of aggregates of 8 mm, water to binder ratio of 0.25 and 28-days compressive strength around 140 MPa. These types of concrete do not contain enough water for hydration of the cement, so an internal curing process carried out by pre-wetting aggregates can improve this situation. Influence of WCM substitution on workability, bending and compressive strength and modulus of elasticity of concrete are discussed in this paper. The frost resistance of concretes is discussed as well.
REFERENCES (25)
1.
A. Neville, P.C. Aïtcin, High performance concrete—An overview. Mater. Struct. 31(2), 111–117 (1998). https://doi.org/10.1007/BF0248....
2.
P.C. Aïtcin, The problems with high strength and low w/c ratio concretes. Cem. Wapno Beton 19(2), 127–137 (2014).
3.
M. Suzuki, M.S. Meddah, R. Sato, Use of porous ceramic waste aggregates for internal curing of high-performance concrete. Cem. Concr. Res. 39(5), 373–381 (2009). https://doi.org/10.1016/j.cemc....
4.
J.X. Lu, P. Shen, H.A. Ali, C.S. Poon, Development of high performance lightweight concrete using ultra high performance cementitious composite and different lightweight aggregates. Cem. Concr. Compos. 124, 104277 (2021). https://doi.org/10.1016/j.cemc....
5.
B.A. Tayeh, D.M.A. Saffar, R. Alyousef, The utilization of recycled aggregate in high performance concrete: A review. J. Mater. Res. Technol. 9(4), 8469–8481 (2020). https://doi.org/10.1016/j.jmrt....
6.
D. Caro, C. Lodato, A. Damgaard, J. Cristóbal, G. Foster, F. Flachenecker i in., Environmental and socio-economic effects of construction and demolition waste recycling in the European Union. Sci. Total Environ. 908, 168295 (2024). https://doi.org/10.1016/j.scit....
7.
M. Melo, Analysis of the possibility of using waste from the production of cement-bonded particleboards. Brno University of Technology, Faculty of Civil Engineering, Department of Technology of Building Materials and Components, Brno (2013).
8.
A. Bartoň, Possibilities of usage of waste from the production of cement-bonded particleboard in building materials. Brno University of Technology, Faculty of Civil Engineering, Department of Technology of Building Materials and Components, Brno (2018).
9.
J.S. Suh, E.C. Kang, J.Y. Park, Manufacturing characteristics of cement-bonded wood composite board as sound absorption type-noise barrier. J. Korean Wood Sci. Technol. 32(6) (2004).
10.
K. Matyskova, V. Bilek, L. Prochazka, R. Hedlova, M. Hornakova, Replacement of fine aggregates in fine-grained concrete by waste material from Cetris boards production. Defect Diffus. Forum 432, 31–38 (2024). https://doi.org/10.4028/p-sMCI....
11.
EN 1097-7, Tests for mechanical and physical properties of aggregates – Determination of the particle density of filler – Pyknometer method. European Committee for Standardization, Brussels (2022).
12.
ČSN 72 1070, Determination of pH of ceramic raw materials and masses. Czech Agency for Standardization, Prague (2015).
13.
EN 196-3, Methods of testing cement – Part 3: Determination of setting times and soundness. European Committee for Standardization, Brussels (2017).
14.
N.L. Thomas, J.D. Birchall, The retarding action of sugars on cement hydration. Cem. Concr. Res. 13(6), 830–842 (1983). https://doi.org/10.1016/0008-8....
15.
D.P. Miller, A.A. Moslemi, Wood-cement composites: Effect of model compounds on hydration characteristics and tensile strength. Wood Fiber Sci. 23(4), 472–482 (1991).
16.
EN 196-1, Methods of testing cement – Determination of strength. European Committee for Standardization, Brussels (2016).
17.
EN 1015-3, Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by flow table). European Committee for Standardization, Brussels (1999).
18.
EN 12390-7, Testing hardened concrete – Density of hardened concrete. European Committee for Standardization, Brussels (2019).
19.
ISO 1920-10, Testing of concrete – Part 10: Determination of static modulus of elasticity in compression. International Organization for Standardization, Geneva (2010).
20.
EN 12504-4, Testing concrete in structures – Determination of ultrasonic pulse velocity. European Committee for Standardization, Brussels (2021).
21.
ČSN 73 1371, Non-destructive testing of concrete – Method of ultrasonic pulse testing of concrete. Czech Agency for Standardization, Prague (2011).
22.
ČSN 73 1322, Determination of frost resistance of concrete. Czech Agency for Standardization, Prague (1969).
23.
V. Bílek, M. Pesata, K. Matyskova, P. Miarka, Long-term development of mechanical properties of concrete with different water to cement ratio and internal curing ability. Fract. Struct. Integr. 19(71), 263–272 (2024). https://doi.org/10.3221/IGF-ES....
24.
T. Pavlů, K. Fořtová, J. Řepka, D. Mariaková, J. Pazderka, Improvement of the durability of recycled masonry aggregate concrete. Materials 13(23), 5486 (2020). https://doi.org/10.3390/ma1323....
25.
Repository:
Experimental dataset: HPC with substitution of aggregates by CETRIS waste material. 2024. https://doi.org/10.5281/zenodo....
Share
RELATED ARTICLE
| ISSN: | 1425-8129 |
Całkowita kwota działania: 101 900 PLN
Kwota dofinansowania z MNiE: 85 100 PLN
Celem działania jest podniesienie poziomu technicznego obsługi Autorów i usprawnienie przepływu artykułów w procesie redakcyjnym.
Działania mające realizować powyższy cel polegać będą na:
- wprowadzeniu systemu elektronicznego zarządzania zgłaszaniem, recenzowaniem i przetwarzaniem artykułów,
- zmiana dotychczasowej organizacji strony internetowej,
- integracja numerów DOI (przydzielanych obecnie publikowanym artykułom) z bazą CrossRef.
© 2006-2026 Journal hosting platform by Bentus
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
